Microsens MS453522M Manual do Utilizador

MS453522M 8 Port Gigabit Ethernet Switch User's Manual Release 2.14 Issue 12.2006

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 5 • Supports 802.1Q VLAN • Supports user management and limits three users to login • Maxi

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 95 Function name: GVRP Counter Function description: All GVRP counters are mainly divided

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 96 LeaveEmpty Message Packets: Number of GARP BPDU with Leave Empty message is received by

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 97 Function name: GVRP Group Information Function description: To show the dynamic group m

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 98 3-13. STP Configuration The Spanning Tree Protocol (STP) is a standardized method (IEEE

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 99 All bridges in the LAN will re-learn and determine which the root bridge is. Maximum Age

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 100 3-13-2. STP Configuration The STP, Spanning Tree Protocol, actually includes RSTP. In

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 101 Forward Delay: You can set the root bridge forward delay time. This figure is set by ro

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 102 3-13-3. STP Port Configuration Function name: STP Port Setting Function description: I

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 103 802.1w RSTP recommended value: (Valid range: 1 – 200,000,000) 10 Mbps : 2,000,000 1

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 104 M Check: Migration Check. It forces the port sending out an RSTP BPDU instead of a leg

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 6 1-4. View of 8 Port Gigabit Ethernet Switch 1-4-1. User Interfaces on the Front Pa

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 105 3-14. Trunking Configuration The Port Trunking Configuration is used to configure the s

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 106 Per Trunking Group supports a maximum of 12 ready member-ports. Please note that some d

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 107 Function name: Port Setting/Status Function description: Port setting/status is used t

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 108 Aggtr: Aggtr is an abbreviation of “aggregator”. Every port is also an aggregator, and

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 109 Function name: Aggregator View Function description: To display the current port trunk

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 110 Function name: LACP Detail (LACP Aggregator Detailed Information) Function descriptio

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 111 Function name: LACP System Priority Function description: It is used to set the prior

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 112 3-15. 802.1X Configuration 802.1X port-based network access control provides a method t

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 113 The overview of operation flow for the Fig. 3-52 is quite simple. When Supplicant PAE i

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 114 The Fig. 3-54 shows the procedure of 802.1X authentication. There are steps for th

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 7 • LED Indicators LED Color Function System LED POWER Green Lit when +5V DC power

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 115 8. If user ID and password is correct, the authentication server will send a Radius-Ac

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 116 Only MultiHost 802.1X is the type of authentication supported in the switch. In this mo

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 117 Function name: 802.1X State Setting Function description: This function is used to c

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 118 Function name: 802.1X Mode Setting Function description: Set the operation mode of 802

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 119 Function name: Port Security Management Function description: Shows each port status.

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 120 Function name: Param. Setting Function description: This function is used to configur

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 121 reAuthEnabled: Choose whether regular authentication will take place in this port. Defa

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 122 3-16. Alarm Configuration Function name: Events Configuration Function descrip

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 123 Fig. 3-59 Function name: Email/SMS Configuration Function description: Alarm config

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 124 Parameter description: Email: Mail Server: the IP address of the server transferring

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 8 1-5. View of the Optional Modules In the switch, Port 7~8 includes two types of media ---

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 125 3-17. Configuration The switch supports three copies of configuration, including the de

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 126 3-17-1. Save/Restore Function name: Save As Start Configuration Function description:

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 127 Function name: Restore Default Configuration (includes default IP address) Function de

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 128 Function name: Restore User Configuration Function description: Restore User Configura

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 129 3-17-2. Config File Function name: Config File Function description: With this functio

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 130 3-18. Diagnostics Three functions, including Diagnostics, Loopback Test and Ping Test a

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 131 Function name: Loopback Test Function description: In the Loopback Test function, ther

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 132 Function name: Ping Test Function description: Ping Test function is a tool for detect

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 133 3-19. TFTP Server Function name: TFTP Server Function description: Set up IP address o

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 134 3-20. Log This function shows the log data. The switch provides system log data for us

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 9 2. Installation 2-1. Starting 8 Port Gigabit Ethernet Switch Up This section will give

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 135 3-21. Firmware Upgrade Software upgrade tool is used to help upgrade the software funct

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 136 3-22. Reboot We offer you many ways to reboot the switch, including power up, hardware

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 137 3-23. Logout You can manually logout by performing Logout function. In the switch, it p

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 138 4. Operation of CLI Management 4-1. CLI Management Refer to Chapter 2 for

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 139 Fig. 4-1 Fig. 4-2

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 140 4-2. Commands of CLI To see the commands of the mode, please input “?” after the prompt

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 141 4-2-1. Global Commands of CLI end Syntax: end Description: Back to the top mode. When

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 142 help Syntax: help Description: To show available commands. Some commands are the comb

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 143 history Syntax: history [#] Description: To show a list of previous commands that you

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 144 logout Syntax: logout Description: When you enter this command via Telnet connection,

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 10 • TP Port and Cable Installation ⇒ In the switch, TP port supports MDI/MDI-X auto-cros

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 145 restore user Syntax: restore user Description: To restore the startup configuration a

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 146 save user Syntax: save user Description: To save the current configuration as the use

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 147 4-2-2. Local Commands of CLI  802.1X set max-request Syntax: set max-request <p

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 148 set port-control Syntax: set port-control <port-range> <authorized> Descr

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 149 <port range> : syntax 1,5-7, available from 1 to 8 <max> : max. value , rang

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 150 Syntax: set suppTimeout <port-range> <sec> Description: A timer used by t

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 151 show parameter Description: To display the parameter settings of each port. Argument: N

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 152 port 2) port control : Auto reAuthMax : 2 txPeriod : 30

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 153  account add Syntax: add <name> Description: To create a new guest user. When

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 154 modify Syntax: modify <name> Description: To change the username and password o

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 11 2-1-2. Installing Chassis to a 19-Inch Wiring Closet Rail Caution: Allow a proper sp

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 155  alarm <<email>> del mail-address Syntax: del mail-address <#>

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 156 set server Syntax: set server <ip> Description: To set up the IP address of th

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 157 <<events>> del all Syntax: del all <range> Description: To disable

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 158 del trap Syntax: del trap <range> Description: To disable the trap of the event

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 159 set sms Syntax: set sms <range> Description: To enable the sms of the events. A

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 160 Example: MICROSENS(alarm-events)# show Events Email SMS Trap ------

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 161 show (alarm) Syntax: show Description: The Show for alarm here is used to display the

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 162 set phone-number Syntax: set phone-number <#> <phone-number> Description

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 163 show Syntax: show Description: To display the configuration of SMS trap event. Argume

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 164  bandwidth disable egress-rate Syntax: disable egress-rate <range> Descripti

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 12 2-1-3-1. Cabling Requirements for TP Ports ⇒ For Fast Ethernet TP network connection ⎯

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 165 enable egress-rate Syntax: enable egress-rate <range> <data_rate> Descri

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 166 show Syntax: show Description: To display all current settings of the bandwidth. A

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 167  config-file export start Syntax: export start Description: To run the export star

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 168 import user-conf Syntax: import user-conf Description: To run the import user-conf

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 169  dhcp-boot set dhcp-boot Syntax: set dhcp-boot <sec> Description: To set up

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 170  diag diag Syntax: diag Description: Diag is used to test whether UART, DRAM, Flash

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 171  firmware set upgrade-path Syntax: set upgrade-path <filepath> Description:

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 172  gvrp disable Syntax: disable Description: To disable the gvrp function. Argument:

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 173 MICROSENS(gvrp)# group 2 MICROSENS(gvrp-group-2)# set applicant 1-6 non-participant MI

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 174 set applicant Syntax: set applicant <range> <normal|non-participant> Des

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 13 2-1-3-3. Switch Cascading in Topology • Takes the Delay Time into Account Theoretically

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 175 set restricted Syntax: set restricted <range> <enable|disable> Descript

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 176 set timer Syntax: set timer <range> <join> <leave> <leaveall>

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 177 show counter Syntax: show counter <port> Description: To display the counter

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 178  hostname hostname Syntax: hostname <name> Description: To set up the hostn

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 179  IP disable dhcp Syntax: disable dhcp Description: To disable the DHCP function of

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 180 set ip Syntax: set ip <ip> <mask> <gateway> Description: To set t

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 181  log clear Syntax: clear Description: To clear the log data. Argument: None. Possibl

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 182 show Syntax: show Description: To show a list of trap log events. When any of log eve

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 183  mac-table <<alias>> del Syntax: del <mac> Description: To dele

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 184 <<information>> search Syntax: search <port> <mac> <vid&

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 14 Case1: All switch ports are in the same local area network. Every port can access each

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 185 <<maintain>> set aging Syntax: set aging <#> Description: To set

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 186 <<static-mac>> add Syntax: add <mac> <port> <vid> [al

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 187 show filter Syntax: show filter Description: To display the static filter table. Ar

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 188  management add Syntax: Usage: set [<name> <value>] [<vid> <

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 189 delete Syntax: delete # Description: To delete a specific record or range. Argument:

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 190 edit [#]: the specific management policy entry. Available range: 1 to 65536. Syntax:

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 191 show Syntax: show Description: To show the specific management policy record. Argumen

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 192  max-pkt-len set len Syntax: set len <range> <length> Description: To

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 193  mirror set mirror-mode Syntax: set mirror-mode <rx|disable> Description: T

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 194 show Syntax: show Description: To display the setting status of Mirror function. Ar

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 15 Case 2b: Port-based VLAN (See Fig.2-5). 1. VLAN1 members could not access VLAN2,

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 195  port clear counter Syntax: clear counter Description: To clear all ports’ counte

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 196 enable flow-control Syntax: enable flow-control <range> Description: To enabl

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 197 show conf Syntax: show conf Description: To display the each port’s configuration

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 198 Port 7 SFP information ----------------------------------------------------------------

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 199  qos set advance-layer4 Syntax: set advance-layer4 <port-range> <#> &l

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 200 set diffserv Syntax: set diffserv <ds-range> <class> Description: To se

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 201 set pri-tag Syntax: set pri_tag <port-range> <tag-range> <class> D

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 202 set tos Syntax: set tos <port-range> <tos-range> <class> Descriptio

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 203  reboot reboot Syntax: reboot Description: To reboot the system. Argument: None. Po

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 204 set Syntax: set get-community <community> set set-community <community>

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 16 2-1-4. Configuring the Management Agent of 8 Port Gigabit Ethernet Switch We offer you

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 205  stp MCheck Syntax: MCheck <range> Description: To force the port to transmi

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 206 set config Syntax: set config <Bridge Priority> <Hello Time> <Max. Ag

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 207 set version Syntax: set version <stp|rstp> Description: To set up the version

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 208 show port Syntax: show port Description: To display the port information of STP. Ar

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 209 show status Syntax: show status Description: To display the status of STP. Argument

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 210  system set contact Syntax: set contact <contact string> Description: To s

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 211 show Syntax: show Description: To display the basic information of the switch. Argu

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 212  tftp set server Syntax: set server <ip> Description: To set up the IP addr

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 213  time set daylightsaving Syntax: set daylightsaving <hr> <MM/DD/HH> <

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 214 set ntp Syntax: set ntp <ip> <timezone> Description: To set up the curren

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 17 2-1-4-1. Configuring the Management Agent of 8 Port Gigabit Ethernet Switch through the

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 215  trunk del trunk Syntax: del trunk <port-range> Description: To delete the t

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 216 show aggtr-view Syntax: show aggtr-view Description: To display the aggregator lis

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 217 show lacp-priority Syntax: show lacp-priority Description: To display the value of

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 218  vlan del port-group Syntax: del port-group <name> Description: To delete the

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 219 disable sym-vlan Syntax: disable sym-vlan <range> Description: To drop frames f

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 220 set mode Syntax: set mode <disable|port|tag|metro|double-tag> [up-link] Descrip

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 221 set port-role Syntax: set port-role <range> <access|trunk|hybrid> [vid] D

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 222 set tag-group Syntax: set tag-group <vid> <name> <range> <#>

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 223 show pvid Syntax: show pvid Description: To display pvid, ingress/egress rule. Argume

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 224  vs disable Syntax: disable Description: To disable the virtual stack. Argument: Non

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 18 • Set IP Address, Subnet Mask and Default Gateway IP Address Please refer to Fig. 2-7 CL

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 225 set role Syntax: set role <master|slave> Description: To set role. Argument: &

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 226 5. Maintenance 5-1. Resolving No Link Condition The possible causes for a no link LE

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 227 Appendix A Technical Specifications Features • 6 (10/100/1000Mbps) Gigabit Ethernet

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 228 Hardware Specifications  Standard Compliance: IEEE802.3/802.3ab / 802.3z / 802.3u /

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 229  Diagnostic LED: System LED : Power, CPU Per Port LED: 10/100/1000M

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 230 Management Software Specifications System Configuration Auto-negotiation support on

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 231 Appendix B Null Modem Cable Specifications The DB-9 cable is used for connecting a t

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 232 ©2006 MICROSENS GmbH & Co. KG ·

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 19 2-1-4-2. Configuring the Management Agent of 8 Port Gigabit Ethernet Switch through the

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 20 Fig. 2-10 the Login Screen for Web 2-1-5. IP Address Assignment For

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 21 With the classful addressing, it divides IP address into three classes, class A, class B

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 22 Class D and E: Class D is a class with first 4 MSB (Most significance bit) set to 1-1-1-

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 23 In this diagram, you can see the subnet mask with 25-bit long, 255.255.255.128, contains

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 24 For different network applications, the subnet mask may look like 255.255.255.240. This

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual ii Table of Contents CAUTION--------------------------------------------------------------

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 25 2-2. Typical Applications The 8 Port Gigabit Ethernet Switch implements 8 Gigabit Ether

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 26 Fig. 2-15 Office Network Connection Fig. 2-14 Peer-to-peer Network Connection

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 27 3. Operation of Web-based Management This chapter instructs you how to configure and

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 28 In the switch, it supports a simple user management function allowing only one administr

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 29 3-1. Web Management Home Overview After you login, the switch shows you the system infor

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 30 • The Information of Page Layout ⎯ On the top side, it shows the front panel of the s

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 31 PortBandwidth SNMPSystem Mirror QoS IGMP SnoopingMax. Packet Length Root DHCP Boot VL

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 32 3-1-1. System Information Function name: System Information Function description: Show

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 33 Host IP address: The IP address of the switch. Host MAC address: It is the Ethernet MAC

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 34 3-1-2. IP Configuration IP configuration is one of the most important configurations in

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual iii 3-3. MIRROR----------------------------------------------------------------------------

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 35 IP address: Users can configure the IP settings and fill in new values if users set the

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 36 DNS: It is Domain Name Server used to serve the translation between IP address and name

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 37 3-1-3. Time Configuration The switch provides manual and automatic ways to set the syste

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 38 NTP: NTP is Network Time Protocol and is used to sync the network time based Greenwich M

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 39 Day Light Saving End : This is used to set when to stop performing the daylight saving t

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 40 3-1-4. Account Configuration In this function, only administrator can create, modify or

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 41 3-1-5. Management Policy Through the management security configuration, the manager can

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 42 Function name: Management Security Configuration Function description: The switch offer

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 43 IP Range: The switch supports two kinds of options for managed valid IP Range, includin

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 44 3-1-6. Virtual Stack Function name: Virtual Stack Function description: Virtual Stack M

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual iv Caution Circuit devices are sensitive to static electricity, which can damage their del

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 45 Fig. 3-8 Parameter description: State: It is used for the activation or de-act

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 46 3-2. Port Configuration Four functions, including Port Status, Port Configuration, Simpl

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 47 Function name: Port Status Function Description: Report the latest updated status of al

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 48 Speed / Duplex Mode: Display the speed and duplex of all port. There are three speeds 1

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 49 Fig. 3-11 Parameter description of Port 7 and Port 8: Connector Type: Display the con

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 50 Vendor SN (Serial Number): Show the serial number assigned by the manufacturer. Date Co

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 51 3-2-2. Port Configuration Port Configuration is applied to change the setting of each po

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 52 Mode: Set the speed and duplex of the port. In speed, if the media is 1Gbps fiber, it i

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 53 3-2-3. Simple Counter The function of Simple Counter collects any information and provi

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 54 3-2-4. Detail Counter The function of Detail Counter collects any information and provid

About this user’s manual In this user’s manual, it will not only tell you how to install and connect your network system but configure and monitor

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 55 Rx Low Priority Packets: Number of Rx packets classified as low priority. Rx Broadcast:

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 56 Tx 65-127 Bytes: Number of 65 ~ 126-byte frames in good and bad packets transmitted. Tx

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 57 3-3. Mirror Function name: Mirror Configuration Function description: Mirror Configurat

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 58 3-4. Bandwidth Management Function name: Bandwidth Management Function description: Ban

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 59 Broadcast & Multicast for Ingress Rate Limiting (Policing): Set up the limit of Ing

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 60 3-5. QoS (Quality of Service) Configuration The switch offers powerful 5 kinds of QoS fu

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 61 Function name: Per Port Priority Function description: We can assign QoS Priority, incl

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 62 Function name: VLAN Tag Priority Function description: In vlan tag, there are 3 bits be

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 63 Bit 0, Bit 1, Bit 2: According to the arrangement of VLAN-tagged priority, it can form

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 64 Function name: IP ToS Classification Function description: Another QoS function is the

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 2 1. Introduction 1-1. Overview of 8 Port Gigabit Ethernet Switch 8-port Gigabit L2 Manage

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 65 Bit 0, Bit 1, Bit 2: According to the arrangement of Bit 5 ~ Bit 7 in TOS Field of IP

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 66 Function name: IP TCP/UDP Port Classification Function description: In L4 QoS Configurat

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 67 Prioritize Streaming Audio/Video: Belong to the QoS in L4. Just tick the option button

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 68 Fig. 3-21 Advanced Mode Fig. 3-22 Simple Mode Simple Mode: Press <Simple<&l

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 69 Function name: IP Diffserv Classification Function description: In the late 1990s, the

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 70 3-6. SNMP Configuration Any Network Management System (NMS) running the Simple Network M

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 71 Default SNMP function : Enable Default community name for GET: public Default community

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 72 3-7. IGMP Snooping The function, IGMP Snooping, is used to establish the multicast group

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 73 Parameter description: IGMP snooping mode selection: The switch supports three kinds of

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 74 3-8. Max. Packet Length Function name: Max. Packet Length Function description: The swi

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 3 • Key Features in the Device QoS: Support Quality of Service by the IEEE 802.1P standard

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 75 3-9. DHCP Boot The DHCP Boot function is used to spread the request broadcast packet in

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 76 3-10. VLAN The switch supports Tag-based VLAN (802.1q) and Port-based VLAN. Support 25

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 77 Metro Mode: The Metro Mode is a quick configuration VLAN environment method on Port-bas

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 78 Up-link Port: This function is enabled only when metro mode is chosen in VLAN mode.

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 79 3-10-2. Tag-based Group Function name: Tag-based Group Configuration Function descript

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 80 Add Group: Create a new Tag-based VLAN. Input the VLAN name as well as VID, configure th

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 81 3-10-3. Port-based Group Function name: Port-based Group Configuration Function descri

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 82 Add Group: Create a new Port-based VLAN. Input the VLAN name and choose the member by ti

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 83 3-10-4. Tag Rule Function name: Tag Rule Function description: In VLAN Tag Rule Setting

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 84 Role: This is an egress rule of the port. Here you can choose Access, Trunk or Hybrid.

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 4 1-2. Checklist Before you start installing the switch, verify that the package contains

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 85 3-11. MAC Table MAC Table Configuration gathers many functions, including MAC Table Info

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 86 Port: The port that exists in the searched MAC Entry. VID: VLAN Group that MAC Entry ex

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 87 Function Name: MAC Table Maintenance Function Description: This function can allow the u

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 88 Function Name: Static Forward Function Description: Static Forward is a function that al

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 89 Function name: Static Filter Function Description: Static Filter is a function that de

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 90 Function name: MAC Alias Function description: MAC Alias function is used to let you as

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 91 Parameter description: MAC Address: It is a six-byte long Ethernet hardware address and

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 92 3-12. GVRP Configuration GVRP is an application based on Generic Attribute Registration

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 93 Function name: GVRP Config Function description: In the function of GVRP Config, it is

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual 94 Normal: It is Normal Registration. The Registrar responds normally to incoming GARP me