Microsens RS232 Especificações descarregar pdf (Página 20)

4 Port Industrial Device Server Manual page 20/36

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

The following table describes the labels in this screen.

Label

Description

Destination Host

Set the IP address of host.

Port

Set the port number of data port.

Idle Timeout

When serial port stops data transmission for a defined period of time

(Idle Timeout), the connection will be closed and the port will be freed

and try to connect with other hosts. 0 indicate disable this function.

Factory default value is 0. If Multilink is configured, only the first host

connection is effective for this setting.

Alive Check

The serial device will send TCP alive-check package in each defined

time interval (Alive Check) to remote host to check the TCP

connection. If the TCP connection is not alive, the connection will be

closed and the port will be freed. 0 indicate disable this function.

Factory default is 0.

Connect on Startup

The TCP Client will build TCP connection once the connected serial

device is started.

Connect on Any

Character

The TCP Client will build TCP connection once the connected serial

device starts to send data.

Service Mode – UDP Mode

Compared to TCP communication, UDP is faster and more efficient. In UDP mode,

you can Uni-cast or Multi-cast data from the serial device server to host computers,

and the serial device can also receive data from one or multiple host.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sem comentários

Microsens RS232 Especificações Página 20