Microsens RS232 Especificações descarregar pdf (Página 31)

4 Port Industrial Device Server Manual page 31/36

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

Management

Access IP Control

Access IP Control Settings allow you to add or block the remote host IP

addresses to prevent unauthorized access. If host’s IP address is in the

accessible IP table, then the host will be allowed to access the Device Server.

You can choose one of the following cases by setting the parameter.

1. Only one host with a special IP address can access the device server, “IP

address /255.255.255.255” (e.g., “192.168.0.1/255.255.255.255”).

2. Hosts on a specific subnet can access the device server.

“IP address/255.255.255.0” (e.g., “192.168.0.2/255.255.255.0”)

3. Any host can access the device server. Disable this function by un-checking

the “Enable IP Filter” checkbox

SMTP/SNMP Conf

Email Server configuration includes the mail server’s IP address or domain. If the

authentication is required, specify your name and password. There are 4 Email

addresses that you can specify to receive the notification.

SNMP Server configuration includes the SNMP Trap Server IP address, Community,

Location and Contact. There are 4 SNMP addresses you can specify to receive the

notification.

SysLog server configuration includes the server IP and server Port. This option need

to use with VCOM Manager.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Sem comentários

Microsens RS232 Especificações Página 31