Microsens RS485 Manual do Utilizador descarregar pdf (Página 17)

MICROSENS User Manual Device Server RS-232/422/485 Port to 1x or 2x 10/100TX

and Device Server RS-232/422/485 Port to 1x 100FX

2. Then, lightly push the DIN-Rail into the track.

3. Check if the DIN-Rail is tightened on the track or not.

4. To remove the device server from the track, reverse steps above.

Wall Mount Plate Mounting

Follow the below steps to mount the device server with wall mount

plate.

1. Remove the DIN-Rail from the device server; loose the screws to remove the

DIN-Rail.

2. Place the wall mount plate on the rear panel of the device server.

3. Use the screws to screw the wall mount plate on the device server.

4. Use the hook holes at the corners of the wall mount plate to hang the device

server on the wall.

5. To remove the wall mount plate, reverse steps above.

Screwing the wall mount plate

on the device server

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Sem comentários

Microsens RS485 Manual do Utilizador Página 17