Microsens RS232 Especificações descarregar pdf (Página 24)

19'' 6U Chassis page 24/71

To the value xxx.yyy.zzz.1, where xxx.yyy.zzz defines the MS430502M chassis IP

Address map.

2. Configure the DIP switches

• Remove MGNT board (see the MS430502M chassis Maintenance manual for

details about the unit extraction)

• Using the top view of the MGNT Board given previously in this part, locate

the DIP switches

• Use a needle-like tool (i.e. paper clip) to move the DIP switches in order to

set the value of the last byte of the MS430502M chassis IP Address

• Plug again the MGNT Board

• Try to ping the MS430502M chassis to the new IP address to check that the

procedure is completed successfully

End procedure

• Manual

The object mgnt2GigmBoardIpAddress

Location: ...\microsens\mgnt2\mgnt2SNMPAgentData\ mgnt2IPmanagment

Can be used to define the MS430502M chassis IP address in a manual way. In that

case, the DIP switches of the MS430502M chassis Management Board must be all

set to 0 or all set to 1.

The MGNT board resets automatically in a warm manner to apply the IP address

modification.

Setting the MS430502M Chassis IP Subnet Mask

• The object

mgnt2GigmNetmask

Location: ...\microsens\mgnt2\mgnt21SNMPAgentData\mgnt2IPmanagment,

defines the IP Subnet Mask of the MS430502M Chassis.

The MGNT board resets automatically in a warm manner to apply the IP Subnet Mask

modification.

Setting the MS430502M Chassis Gateways address

The MS-MNGT can handle two different gateways to communicate over layer 3

network. These two gateways are linked to an order number to determine the main

and the backup gateway.

By default the MGNT is using the gateways with the lowest order. If this gateway is

dead, the MGNT switch to the other gateway. The dead gateway detection is

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 70 71

Sem comentários

Microsens RS232 Especificações Página 24